Vortice CB LCD W, Instruction Booklet

Page: 15 / 76

15
ENGLISH
Key and display backlighting remains active for about two minutes after the last key
is pressed. When backlighting is off, you can switch it back on again without
activating any function by pressing any key.
NOTE:
Further details and features are described in the paragraph "Operation
and use" in the target product Instructions Manual.
3. Connection diagrams
Fig. 4
The remote control does not need to be powered to the external power supply but
is wired directly to the target product (via terminal board).
Connection via cable is carried out via an outside wall of a box with an external or
recessed cable.
Reference Key
Function
Description
(1) I
Function recall 1
(2) II
Function recall 2
(3) X
Exits the page that
is displayed.
(4)
▲
Increases speed / moves to
the upper row or to the higher
value.
(5)
▼
Decreases speed / moves
to the bottom row or to the
lower value.
(6)
✔
Confirmation key (OK)
CAUTION!:
Equipment connection must be carried out by professionally qualified
personnel.
!
CAUTION!:
The electrical power line to which the equipment will be connected must
be protected by a suitable differential thermal magnetic switch.
!