Vortexgear Race 3, User Manual

Page: 4 / 4

http://amazon.com/Vortexgear or https://vortexgear.us
https://amazon.ca/Vortexgear or https://vortexgear.ca
5. RGB Backlit:
Multi-color dynamic Backlighting
Pn + ESC = Palette
1 Single Color - Red
2 Single Color - Green
3 Single Color - Blue
4 Display single color LED mode
1
5 Display full color LED mode
2
9 Custom LED mode 1
0 Custom LED mode 2
-_ Display recording 1
=+ Display recording 2
X Brightness down
V Brightness up
< Light effect speed up
> Light effect speed up
RGB LEDs edit descriptions:
The RGB Race 3 has a total of 3 layers to edit the LEDs
3
.
Step 1. Choose a layer (Fn+<,> or
?
key) you want to edit.
Step 2. Press Pn + 9 or 0 to enter the edit mode.
Step 3. Press Pn + 1,2 and 3 to mix color
4
OR press Pn + ESC
5
to turn on the
palette and select a color you want.
Step 4. Select a key or a row you want to change color.Step 5. Press Pn + 9 or 0
again to exit edit mode.Step 6. Press Pn + - or Pn + = to display the previously
saved setting.
1
Interactive mode, Flash vortex mode, Aurora mode
2
Full key light mode, Breath mode, Vortex mode, Rain drop mode.
3
Each layer can be edited in single key(Pn+9) or whole row(Pn+0)
4
The color you mixed will show on Pn key
5
There are total have 61 kinds of colors on palette.