Vortex Ranger 1500, Manual

Page: 4 / 11

7 6
1500
Rangef inder
M
Ode
s
electiOn
Your Ranger is factory set to the angle
compensating HCD mode, yards, and
medium brightness. For most users, these
are the preferred settings.
To change modes, after the Ranger is
powered up activate the Mode Selection
by pressing and holding the Menu button
for at least four seconds. Once the Mode Selection screen
displays, release the button.
As you progress through Mode Selection, you may exit at any
time and save your settings by pressing and holding the Menu
button for at least four seconds—the Ranger will then return
to power-up condition.
s
et and
s
ave
M
Ode
s
electiOns in
3 s
teps
1. Choose between the
HCD and LOS Modes.
After activating the Mode
Selection, press the
Measure button to toggle
between the HCD and LOS
displays. Press the Menu
button to save your desired
choice and move to the Yards/Meters selection
screen.
2. Choose between
Yards and Meters
Display.
Press the Measure button
to toggle between the
Yards and Meters display.
Press the Menu button to
save your desired choice
and move to the Brightness selection screen.
3. Choose the Brightness Setting.
Mode Selection
Display
Use the Measure
button to toggle
through each
Mode Selection
option.
Use the Menu
button to activate
the Mode Selection
displays.
Choose Between HCD and LOS
Choose Between Yards and Meters