5
4
RANGER
®
1300
LASER RANGEFINDER
Lanyard
Attachment
Sockets
Measure Button
Adjust Focus
with Eyecup
Battery
Compartment
Utility Clip
(Attaches to Either Side)
Menu Button
Battery Installation
Open the battery compartment
and install the CR2 battery
included with the Ranger
®
.
Powering On/Off
Once the battery is installed,
the Ranger
®
1300 is in
Ready
Condition
—the normal power-off
condition when not ranging. To
power up the Ranger
®
1300 from
Ready Condition and prepare for
ranging,
press and release the
Measure button. The HCD or LOS
ranging screen will display. The
Ranger
®
1300 will power down
automatically after ten seconds
of non-use.
Focus
Turn the eyecup in or out until
image is sharp.
Battery
Power Indicator
Remove
battery
compartment
cover.
Install battery with positive
side facing outwards.
The Ranger
®
1300 Rangefinder
