10
11
FURY
®
HD
5000
Scan Ranging
Activate Scan Ranging by pressing and holding the Measure
button down. Keeping the button depressed will continuously
measure distance as you pan back and forth across target objects.
The aiming circle will blink as you pan. Releasing the Measure
button will return laser to the Power Up Condition.
HCD Scan
LOS Scan
No Range
Returned
Setting Target Modes
Press the Measure button to toggle between the Best and Last
displays. Press the Menu button to save your desired choice and
move back to the HCD/LOS selection screen.
To exit Mode Selection and save settings, press and hold the Menu
button for four seconds. Settings will also save when Fury
®
powers
down automatically.
Ranging
With the Fury
®
HD 5000 powered up,
position the reticle on the target object
and press and release the Measure button
to get the distance measurement. If
the laser is not able to range due to the
reflectivity of the target, you will see a
display similar to that shown here. To
range a new target, simply re-aim and
press the Measure button again.
