DP/N: 007135v1.0, 2018-02-22
© 2017 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured.
3
A.
Located on the driver side of the spare tire well
is the OEM fuel pump driver module. Locate
the provided fuel pump booster adapter har
-
ness & install it in-line between the OEM fuel
pump driver module & main vehicle harness.
(See Fig. 2-a)
B.
Using 2x of the provided zip ties, secure the
fuel pump booster harness to the existing OEM
harness that runs along the body of the vehicle
(usually covered by the plastic tail light cover).
(See Fig. 2-b)
Fig. 2-a: Install Fuel Pump Booster Adapter
Harness
Fig. 2-b: Secure Fuel Pump Booster Harness
C.
Place the fuel pump booster in the passenger
side rear portion of the spare tire well. If the
vehicle is equipped with a spare tire, confirm
that the spare tire will fit back into its original
location. Using the fuel pump booster as a tem
-
plate, mark the four mounting locations. Using
a drill motor & 1/8" drill bit, drill the 4x mounting
holes.
(See Fig. 2-c)
Fig. 2-c: Drill Mounting Holes
2.
FUEL PUMP BOOSTER INSTALLATION
DRILL 4X HOLES
USING 1/8" DRILL BIT
NOTE: Since the walls of the spare tire well
are not flat, it may be able to only drill
3x mounting holes.