13
Operating Instructions
Brewing Milk Powder Mode
The default setting for the appliance is
the
“Brew Milk”
mode. Before starting,
check to assess the status of the Milking
Indicator (shown above).
FLASHING
- The water has not reached
the required temperature and is still
heating up, please wait a few minutes.
SOLID
- The appliance is ready for use
and you can continue. Click the
-
/
+
button to adjust the amount of milk,
the number on the right is the current
amount.
Press
START
to brew milk
.
NOTE:
The appliance is equipped with a bottle
sensor switch to prevent any unintentional
touch of the button after brewing, which can
cause milk to overflow. For direct use after,
please remove and reposition the bottle before
the appliance can be activated.
When the sensor cannot detect the
bottle, you can turn off the sensor as
follows:
Press the
MENU
,
START
and
+
buttons
at the same time, this will prompt a
long beep. A white light will appear
(illustrated below), this indicates the
sensor is off and you can start brewing
the milk powder.
Milking
Indicator
