VORON VORON2 2.4R2, Build Manual

Page: 210 / 293

210
WWW.VORONDESIGN.COM
MAINS INLET WIRING
We show the wiring in the IEC colour scheme.
Depending on your region the colour scheme
and wiring standards will differ.
Mains wiring should only be done by qualified
personnel trained in local regulations and safety
standards. Depending on your local regulations
you may be forbidden from wiring the mains
side and/or putting the printer into operation;
seek professional assistance.
Failure to observe those could result in bodily
harm.
ATTACH 250MM OF WIRE
Cables should be at least 1mm² (AWG18) or
thicker depending on local regulations.
POWER INLET
M
ai
ns
In
le
t
Sw
itc
h
ISOLATED CONNECTORS ONLY
Make sure that all mains connectors are
properly isolated and meet the applicable
safety standards.