background image

5

English

or if damage is apparent to any part of the unit. To avoid 

risk of electrical shock, do not attempt to repair or replace 

parts. Only original replacement parts may be used. Contact 

Vornado Consumer Service at 1-800-234-0604 (phone) or 

[email protected] (email) for further instructions 

about replacement and repair.    

-   Risk of fire. Your appliance may be equipped with a detachable 

power supply or a cord/plug with a safety device such as a fuse. 

Use only the power cord and plug provided. 

-   Before plugging power cord into electrical outlet, be sure that 

all electrical information on the rating label, including voltage, is 

compatible with your outlet’s power supply. 

-   Never use the cord as a handle or otherwise yank, strain or 

stretch the power cord. 

-   While the product is plugged in, do not insert or allow foreign 

objects to enter any input or output opening as this may cause 

risk of electric shock or fire, or damage the product.

-   A loose fit between wall outlet (receptacle) and plug may cause 

overheating and distortion of the plug. Discontinue use of the 

product in this outlet. Contact a qualified electrician to replace 

loose or worn outlets.

-   This product's power cord is equipped with a three-prong,

  grounded plug that must be inserted into a grounded 

receptacle.

-   Before moving, repositioning, servicing, cleaning and when not 

in use, use the product controls to turn off the power and then 

unplug.  To disconnect from outlet, grasp and pull only the plug. 

Also, power off and unplug if the product will be left unattended 

for an extended period of time or during electrical storms. 

SERVICING WARNING—To reduce risk of fire, electrical shock 

and injury to persons, observe the following:

-   Clean your product regularly, only as is instructed in this 

manual. Prior to cleaning, turn off the power on your product 

and unplug. Do not use gasoline, thinners, solvents, ammonias 

or other chemicals for cleaning. Refer to the CLEANING  

instructions provided.

-   Do not open appliance housing. To avoid risk of shock, all 

service and/or repairs must be done by a Vornado Authorized 

Service Center. 

-  This product employs overload protection (fuse). A blown fuse 

indicates an overload or short-circuit situation. If the fuse blows, 

unplug the product from the outlet. Replace the fuse as per the 

user servicing instructions (follow product marking for proper 

fuse rating) and check the product. If the replacement fuse 

blows, a short-circuit may be present and the product should 

be discarded or returned to an authorized service facility for 

examination and/or repair.

User Servicing Instructions

1. Using the product controls, turn off the appliance. 

2. Grasp the plug (not the cord) and disconnect from the 

outlet. 

3. Risk of Fire. Replace fuse only with 5 Amp, 125 Volt 

fuse as approved by Vornado Consumer Service. For an 

authorized replacement fuse, please contact Vornado 

Consumer Service. 

4. Once the replacement is received, use a small flat-head 

screwdriver to slide open the fuse cover (located on the 

Summary of Contents for EXO51
















Reviews: