background image

4

English

FCC Compliance Statement

This equipment has been tested and complies with the Part 15 FCC 

Rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may 
cause undesired operation. 

NOTE:

 This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to Part 15 of the FCC 

rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This product 
generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a 
particular installation. If this product does cause harmful interference 
to radio or television reception, which can be determined by turning 
the product off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
-   Reorient or relocate the receiving antenna.
-   Increase the separation between the equipment and receiver.
-   Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected.

-   Contact Vornado Consumer Service or the dealer or an experienced 

radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate 
the equipment.

Supplier’s FCC Declaration of Conformity

Unique Identifier: Vornado Model EVDC300

Responsible Party: Vornado Air LLC
Mailing Address : 415 E. 13th St., Andover, KS 67002
Contact: www.vornado.com

SAVE THESE INSTRUCTIONS

Summary of Contents for energy smart EVDC300





















Reviews: