background image

VOPTech  Document                                                                  Four  Channel’s  GSM  VoIP  Gateway 

Copyright@2009 VOPTel Technology Co., Ltd All Rights Reserved.   

 

5

¾

 

PPP over Ethernet (PPPoE) 

¾

 

PPP Authentication Protocol (PAP) 

¾

 

Internet Control Message Protocol (ICMP) 

¾

 

TFTP Client 

¾

 

Hyper Text Transfer Protocol (HTTP) 

¾

 

Dynamic Host Configuration Protocol (DHCP) 

¾

 

Domain Name System (DNS) 

¾

 

User account authentication using MD5 

¾

 

Out-band DTMF Relay: RFC 2833 and SIP Info 

1.3 Hardware Specification 

¾

 

ARM9E Processor 

¾

 

DSP for voice codec and voice processing 

¾

 

Two 10/100 BaseT Ethernet ports with full compliant with IEEE 802.3 

¾

 

LEDs for Ethernet port status 

¾

 

Four GSM Channels’ Connection 

 

1.4 Software Specification 

¾

 

LINUX OS 

¾

 

Built-in HTTP Web Server 

¾

 

PPPoE Dial-up 

¾

 

NAT Broadband Router Functions 

¾

 

DHCP Client 

¾

 

DHCP Server 

¾

 

Firmware On-line upgrade 

¾

 

PSTN Caller ID transmit 

¾

 

Multiple Language Support 

¾

 

Supported call divert 

¾

 

Supported PSTN auto call out to PSTN 

¾

 

Supported Multi_devices Cooperate Mode(Group Mode) 

¾

 

Supported SMS call out 

 

1.5 List of the Package 

a)

 

One GoIP4 Gateway main unit 

b)

 

One DC12V/2000mA power adaptor 

c)

 

One Ethernet cable (3M) 

Summary of Contents for GoIP4


















































Reviews: