LC-CAST 600 en v5
11
Sub-submenu
LAST 10
Sub-submenus
TOTAL and AFTER
DD/ММ/YYYY
Submenu
TIME
LAST MELTING
([TIME]
[HOUR]
[DATE]
[Т1]
[Т2]
[N]
[UH]
[UL]
LAST CASTING
[TIME]
[HOUR]
[DATE]
[TORQUE]
[REV 1]
Where:
TIME
the time for melting / casting;
HOUR and DATE
show the last time when the
machine had been worked;
Т1 & Т2
are the temperatures of the generator
before and after the last melting;
N
is a number which is proportional to the load
of generator (to the used amount of metal in the
crucible);
TORQUE
is the centrifugal force the last casting
was made with.
REV 1
is the time of first turn in milliseconds;
The information is the same like in submenu
LAST
but
here with turning the
MPK
you can track the last 10
cycles.
These are two identical screens with accumulated
machine data. In
TOTAL
accumulation is from the data of
manufacture and in
AFTER DD/ММ/YYYY
the data is
after the specified date and can be reset. This reset is
made by pressing the
MPK
and confirmation.
The accumulated data are:
TG
– the lowest and the highest temperatures of the
generator;
IG
– the heaviest load of the generator;
UG
– the lowest and the highest voltage of the generator;
The total time (in hours and minutes) is displayed on the
left of the last line and the counter of castings is
displayed on the right.
TIME > TIME FOR CASTING
Xxs
CLOCK
TIME FOR CASTING
- here you can adjust the operating
time of centrifugation ranged from 10 to 90 seconds.
CLOCK
– this sets the date and time. On the top line may
be prohibited from appearing on the screen
.
