VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
15
3.3 Shutdown
There are two safety mode for Shutdown
Enter
【
Exit
】
,select
【
Power Down
】
.
Abnormal shutdown
Through the rear panel to shutdown
During the DVR running, directly to turn off the power through the rear panel power switch, please avoid as much
as possible to do it. (specially while the DVR recording).
Directly to pull up the power cable of DVR
While the DVR running, directly to pull up the power cable of DVR, please avoid as much as possible to do it.
(specially while the DVR recording).
Caution: In some area, the power supply is irregularity, it will cause the DVR working not normal-operation, the
DVR will be damaged in serious. In this surroundings, suggest select the stabilized voltage supply.
3.4 Multi Channel
1/4/8/9/16/24/32 preview screen mode switch
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
16
3.5 Preview
After log in system of DVR, system will automatically directly enter the preview mode
In the preview picture, you can see the overprint date, time, channel name, if the date and time is not correct show on
the picture, re setting the date. There is a alarm input mode icon. (the meaning of every kind of icon as following
table)
Channel picture attention
3.6 Recording operation
Customer can according to select the different kind of recording mode in this system. For the
different kind of recording mode you set, the channel will be showed the mark on everyone channel.
Manual recording
Note: Manual recording operational requirement the user should have “recording” permission.
Please make sure the hard disk drive has been installed and it has been formatted.
1
）
）
）
）
Input manual recording operation menu
Single click right key of mouse or In main menu=> recording control can into manual recording operation menu.
Under preview mode, press REC key or on the Remote controller unit key into recording control operation menu, as
follows:
2) The explanation of manual recording operation menu
【
manual recording
】
Priority level highest, no matter currently what status of every channel, after carry out the
manual press, corresponding channel will be record common in progress;
【
Auto recording
】
Setting channel recording by setting condition to record under Timing, Motion detection and
Alarm in Recording Setting;
【
Stop Recording
】
All video channel stop recording;
1
Channel is video when channel
video pictures showed this symbol
2
Channel happen when dynamic
test,
channel
video
pictures
showed this symbol
3
Channel happen when channel
video
cover
alarm
pictures
showed this symbol
4
Channel open sound, the channel
video pictures showed this symbol
