TROUBLESHOOTING
PROBLEM
SOLUTION
•
Check that the appliance is connected at the
mains.
•
Boil-dry protection may have been activated.
Ensure the amount of water added exceeds
the 0.5L (minimum) marker.
•
Check that the LID (1) is fitted correctly.
•
Descaling may be required (see
‘Removal of
Mineral Deposits’
).
•
The water in the Kettle is already at a higher
temperature than selected.
THE KETTLE WILL NOT BOIL.
THE KETTLE IS SPUTTERING
WATER OUT OF THE SPOUT.
THE KETTLE WILL NOT SWITCH
ON.
THE KETTLE IS NOT SWITCHING
ON AFTER DESIRED
TEMPERATURE IS SELECTED.
•
The Kettle may be overfilled. Do not exceed
the 1.7L (maximum) marker.
•
Always allow at least 10 seconds for boiling
water to settle before pouring.
•
Ensure the filter is correctly fitted.
6
