VONROC S2_SG502DC, Original Instructions Manual

Page: 8 / 104

8
EN
WWW.VONROC.COM
SAFETY WARNINGS FOR CHARGER
Intended use
Charge only CD801AA and CD803AA type recharge-
able Battery packs with the charger. Other types
of batteries may burst causing personal injury and
damage.
a) The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been
given supervision or instruction.
b) Children being supervised not to play with the
appliance.
c) Do not recharging non-rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!
Electrical safety
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable for
the power rating of the machine with a minimum
thickness of 1.5 mm
2
. If you use an extension
cable reel, always fully unroll the cable.
2. MACHINE INFORMATION
Intended use
The spray gun is intended for painting and var-
nishing work in a domestic setting. The spray gun
is suitable for water, oil and solvent based paint/
varnish/stains, It is recommended to use environ-
mentally friendly paints and solvents. Only use the
spray gun for its intended purpose. Do not use the
machine to do other things outside of the descri-
bed scope in this manual. The machine product
is not intended for professional or industrial use.
Be aware of the safety warnings and do not use
the later products, acid coating product, granula,
products, corrosive products, caustic products. It is
also not intended to use for spraying plant protec-
tion products for the treatment of plants or garden,
as well as for spraying paint, ink or other materials
on human or animal body.
TECHNICAL SPECIFICATIONS
This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Model No.
Batteries
included
Chargers
included
SG502DC
- -
S_SG502DC
CD801AA CD802AA
S2_SG502DC
2 x CD801AA CD802AA
S3_SG502DC
CD803AA CD802AA
Machine information
Voltage 20V
Maximum water flow rate 500 ml/min
Max paint flow 100-200ml/min
Viscosity Max 70 DIN/s
Container capacity 800 ml
Nozzle diameter 1mm, 1.8mm & 2.5mm
Weight 0.84 kg
Lpa (Sound pressure level) 81.1 dB(A) K=3dB(A)
Lwa (Sound power level) 92.1 dB(A) K=3dB(A)
Vibration 2.578m/s2 K=1.5 m/s2
Model No. CD801AA
Battery Type Lithium-Ion
Voltage 20V
Capacity 2.0 Ah
Recommended charger CD802AA
Weight 0.3 kg
Model No. CD802AA
Charger input 220-240V, 50Hz 0.4A
Charger output 21V 2.5A
Charging time 2Ah battery 60 minutes
Charging time 4Ah battery 120 minutes
Recommended batteries CD801AA, CD803AA
Weight 0.36 kg