VONROC PH504XX, Original Instructions Manual

Page: 6 / 36

6
EN
WWW.VONROC.COM
Cleaning
Clean the regularly with a soft cloth, preferably
after each use. Make sure that openings are free
of dust and dirt. Remove very persistent dirt using
a soft cloth moistened with soapsuds. Do not use
any solvents such as gasoline, alcohol, ammonia,
etc. Chemicals such as these will damage the
synthetic components.
• DO NOT use alcohol, gasoline, abrasive pow-
ders, furniture polish or rough brushes to clean
the heater. This may cause damage or deteri-
oration to the surface of the heater.
• DO NOT immerse the stand in water
• Wait until the stand is completely dry before
use.
Troubleshooting
When stand totters: 1. Arrange an even ground. 2.
Spread legs into max. width and tighten the locking
knob. When upper pole totters and/or is running
in: Make sure that the locking pin is in, work and
tighten locking knobs.
Storage
Store the heater in a cool, dry location when not
in use to prevent dust and dirt build up. Use pack-
aging carton to store.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or im-
properly maintained;
• Non-original spare parts have been used.
This constitutes the sole warranty made by compa-
ny either expressed or implied. There are no other
warranties expressed or implied which extend beyond
the face hereof, herein, including the implied war-
ranties of merchantability and fitness for a particular
purpose. In no event shall VONROC be liable for any
incidental or consequential damages. The dealers
remedies shall be limited to repair or replacement of
nonconforming units or parts.
The product and the user manual are subject to chan-
ge. Specifications can be changed without further
notice.