6
EN
WWW.VONROC.COM
2. MACHINE INFORMATION
Intended use
The impact driver is intended for driving in and
loosening screws and bolts.
Not suitable for construction site usage.
TECHNICAL SPECIFICATIONS
This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Model No
Batteries
included
Chargers
included
CD509DC
-
-
S_CD509DC
CD801AA
CD802AA
S2_CD509DC
2 x CD801AA
CD802AA
S3_CD509DC
CD803AA
CD802AA
Machine information
Voltage
20V
Tool holder
6.35 mm ¼” internal hexagon
Max torque
150 Nm
No load speed
0-2200/min
No load impact rate
0-3000 /min
Machine screw diameter
M4–M8mm
Weight
1.2 kg
Sound pressure level L
PA
93.8 dB(A), K=3dB(A)
Sound power level L
WA
104.8 dB(A), K=3dB(A)
Hand-arm vibration a
h
11.156 m/s
2
K=1.5 m/s
2
Model No
CD801AA
Battery Type
Lithium-Ion
Voltage
20V
Capacity
2.0 Ah
Recommended charger
CD802AA
Weight
0.3 kg
Model No
CD802AA
Charger input
220-240V,50Hz 0.4A
Charger output
21V
2.5A
Charging time 2Ah battery
60 minutes
Charging time 4Ah battery
120 minutes
Recommended batteries
CD801AA, CD803AA
Weight
0.36 kg
Model No
CD803AA
Battery Type
Lithium-Ion
Voltage
20V
Capacity
4.0 Ah
Recommended charger
CD802AA
Weight
0.65 kg
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other batte -
ries could cause serious injury or damage the tool.
CD801AA
20V, 2Ah Lithium-Ion
CD803AA
20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA
Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN 62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
