WARNING
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
on, tripped over or otherwise subjected
to damage or stress. Keep the lead away
from operating machinery.
Do not place the tool or charger on an
uneven surface as a fall may cause serious
damage.
Do not operate the charger in a cabinet
or other enclosure unless proper
ventilation is provided.
Do not place any object onto the charger
or allow any object to rest on the charger.
Never place the tool or charger near or
over a heat source such as radiator or
heater.
The battery can be charged or operated
at temperatures between 0°C and 40°C.
WARNING!
Never charge your Lithium-
ion battery below or above temperatures
recommended as this may result in fire or
serious damage to the battery pack.
The most suitable temperatures to charge
the battery pack are between 20°C and
25°C.
WARNING!
Do not allow water or any
other liquid to come into contact with
the charger as this may result in electric
shock. Do not position the tool or battery
charger near water. Take care not to spill
liquid of any kind on the tool or charger.
DANGER!
If the battery pack becomes
cracked or damaged in any way, do not
insert it into the charger.
Do not use the charger if it has been
subjected to a heavy knock, dropped, or
otherwise damaged in any way. Take the
charger to an authorised service centre
for it to be checked and repaired.
Do not attempt to disassemble the
charger. Opening or removing covers
may expose you to dangerous voltages
or other risks. Incorrect reassembly may
result in the risk of fire or electric shock.
If there is a problem with the charger or
tool, take it to your nearest authorised
service centre.
Take the tool or charger to your nearest
authorised service centre:
If liquid has been spilled onto the tool
or charger, or if rain or water has come
into contact with the tool, battery pack or
charger.
If the tool or charger does not operate
normally after you follow the operating
instructions.
If the tool or charger exhibits a distinct
degradation in performance.
If the tool or charger are damaged in any
way.
If the battery pack is not charged within
the time frame as specified in this manual,
turn the charger off.
If you wish to charge a second battery
pack, unplug the charger from the mains
supply and leave for at least 15 minutes
first.
Do not pull on the lead of the charger
to disconnect it from the mains power
socket.
To reduce the risk of electric shock,
unplug the charger from the power
supply before attempting to clean it. To
clean the tool or charger, wipe with a
damp cloth. Use of any other cleaners is
not recommended.
ADDITIONAL SAFETY INSTRUCTIONS
RELATED TO THE BATTERY PACK AND
BATTERY SAFETY.
Use only the battery pack supplied with
the tool or DOMU Brands approved
replacements.
Do not use the battery to power any
device other than the tools it was sold
with.
Charge the battery only with the charger
supplied with the tools or approved
replacements and according to the
instructions in this manual.
Do not charge the battery in a place
3
