A5P | 01
WORKBENCH: If the Scroll Saw is to be used in a
permanent location, it should be fastened securely to a
firm supporting surface such as a workbench.
NOTE: Mounting Bolts not supplied.
• Place the Scroll Saw in the location you require and
mark the 3 holes on the base.
• Drill the holes using a 3/8” Drill Bit.
• Place the Scroll Saw back into the chosen location and
align up holes.
• Using the Hex Bolts (Not Supplied) secure the Scroll
Saw.
NOTE:
Bolt length should be 1.1/2” plus the
thickness of the bench top.
CLAMPING: If your Scroll Saw is to be used as
a portable tool, it is recommended you fasten it
permanently to a mounting board that can easily be
clamped to a workbench or other stable surface.
The mounting board should be of sufficient size to
avoid tipping while Scroll Saw is in use. Any
good grade plywood or chipboard with a 3/4 in. (19
mm) thickness is recommended.
SECURING THE SCROLL SAW
DUST EXTRACTION
13
35mm
Summary of Contents for 3500180
