background image

WARNING

PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE

This manual contains important information 
regarding the operation and maintenance of 
the Medium Digital Safe. Please ensure you 
read and understand all instructions regarding 
the correct operation of the product before 
securing items in the Safe. 

INTENDED USE.

This Safe is designed and intended for 
domestic indoor use only. Do not use for 
commercial purposes.
This Safe is not a toy. Keep away from children. 
Children should be supervised to ensure they 
do not play with the Safe. 

ADVICE AND GUIDANCE FOR USE.
NEVER 

store the override keys (or the manual) 

in the Safe. Once the batteries have been 
exhausted, you will require the keys to override 
and open the Safe. For security reasons, spare 
keys are not available.

IMPORTANT:

 Store the override keys in a 

safe place for use in the event of the batteries 
becoming exhausted, or should the unlock 
code require resetting. 
Periodically check the batteries for charge 
(every 3 months or as appropriate). If 
the batteries are of low charge, replace 
immediately. Refer to the 

‘Battery Safety’

 

section for guidance on battery use. 

NOTE:

 This Safe is 

NOT

 fireproof or cash 

rated. Contact your insurance provider for 
guidance before storing any valuables in the 
Safe. 
For security purposes, it is recommended that 
you secure the Safe to both a suitable wall 
and floor surface using appropriate fixings. 
Contact your local hardware store or qualified 
person for advice and guidance on the most 
appropriate fixings to use for your wall/surface. 
The Safe should be located out of sight for 
extra security. 
Fixings supplied are intended for use with 
some masonry wall surfaces. If you are unsure 
about assembly or the suitability of your wall or 
the fixings, do not proceed. Contact a qualified 
person for advice and guidance. 

NOTE: 

These important safeguards and 

instructions cannot cover all possible 
conditions and situations that may occur. It 
must be understood that common sense and 
caution are factors which cannot be built into 
any product and are the responsibility of the 
user.
The Safe contains no user-serviceable parts 
with the exception of battery replacement. 
Repairs should only be carried out by a 
qualified person. Improper repairs may 
compromise the integrity or function of the 
Safe.

BATTERY SAFETY.

This product requires 4 x 1.5V LR6 “AA” Bat-
teries (included).
Batteries are to be inserted according to the 
correct polarity as indicated on the Safe. 
Always recharge a full set of batteries at the 
same time. Do not mix old and new batteries. 
Only use batteries of the same or equivalent 
type (e.g. Alkaline, Lithium-ion etc.)
Do not attempt to recharge non-rechargeable 
batteries. Rechargeable batteries should be 
removed from the Safe before recharging. 
Do not attempt to short-circuit the supply 
terminals or batteries for any reason.
Do not dispose of batteries in a fire. Do not 
attempt to crush, puncture or in any way dis-
mantle the batteries for any reason. 
Do not dispose of batteries in your household 
waste. Batteries contain chemicals which are 
damaging to the environment. Recycle bat-
teries where appropriate. Contact your local 
government offices for advice and guidance 
on the correct disposal of batteries or local 
recycling centres. 

Summary of Contents for 08/091











Reviews: