MIDI
The MIDI connection can be used to activate the TRIG switch when the
Paragraphs is in hold or once mode. The paragraphs listens for a “Note
On” and “Note Off” event on all midi channels (1-16), key numbers
(0-127), and velocity values (0-127).
The MIDI input is a 1/8” stereo jack that is wired for a Type B midi
adapter. If you are unsure what type of adapter to use, you can
purchase one directly from Vongon on our website.
MIDI
Signal
MIDI
Connector
Stereo
Minijack
Current
Source
Pin 4
Tip
Current
Sink
Pin 5
Ring
Shield
Pin 2
Sleeve
11
