Front Panel (continued)
6) Multiplier - A constant value multiplied by rise and fall time. This
is effectively a “rate” knob that adjusts the overall speed of the
envelope generator.
7) Lin, Exp - Lin (linear) and exp (exponential). Toggle the shape of
the envelope generator to rise and fall linearly or exponentially.
8) BYPASS - True bypass latching foot switch.
9) TRIG - Soft touch footswitch used to manually trigger the envelope
generator.
10) Cycle, Hold, Once - Toggle the mode of the envelope generator.
11) Res - Resonance amount, when the knob is at ~70% the filter will
begin to self oscillate.
12) Amount - The amplitude of the modulation source, or how much the
cutoff is affected by the envelope generator.
13) Cutoff - Base cutoff frequency of the low pass filter.
14a) IN - 1/4” mono audio input. Line level and instrument levels.
14b) OUT - 1/4” mono audio output. Line level and instrument levels.
15a) 9VDC - Standard power input for effects pedals, 9VDC center
negative 2.1mm barrel jack. Consumes a maximum of 100mA.
15b) CV - 1/8” mono minijack input for voltage triggers with 5 Volt
threshold.
15c) MIDI - 1/8” stereo minijack midi input wired for a “type b” midi
adapter.
Specifications
●
1/4” mono input/output jacks
●
2.1mm DC Connector
●
5.7” x 4.7” x 1.5” enclosure dimensions
●
true bypass
●
input impedance: 1MΩ
●
output impedance: <1kΩ
●
power supply: 9 to 9.6 VDC
●
current draw: 100mA max
5