communication
–
simple
–
flexible
–
unlimited
© Vonamic GmbH 2020
Subject to technical modifications
26
3.8
Keypad
General
The V615 industrial call station has a keypad connection. It is primarily used to provide a larger group
of participants than is possible with the 6 direct selection buttons. Direct, group and SIP calls can be
created with the keypad.
If you have purchased a V615 industrial call station with keypad from Vonamic GmbH, the hardware
and software modification has already been done by the manufacturer. If you have carried out the
conversion yourself, make sure that the connector to the keypad is correctly inserted and that the
keypad is screwed in securely. Furthermore, it is necessary to update the V615 website to the version
"
V615
Keypad (http.tsk)" and the keypad is activated on the website.
The keypad is exchanged for the lower double toggle of the device. This will replace the direct selection
buttons 5 + 6 with the keypad. By activating the keypad, the keys 3 + 4 are assigned fixed functions
which are required for using the kepad:
Call Station V615 with Keypad
Dial:
Press and hold Establishes a connection to the previously dialed number. The
connection type can be selected by entering a prefix.
Cancel:
This key clears the input memory so that all selected digits are deleted. With an existing
SIP connection, this key is used to end the call.
Dial
cancel
2
1
