communication
–
simple
–
flexible
–
unlimited
© Vonamic GmbH 2020
Subject to technical modifications
20
3.4.2
Set up a group call
To set up a group call, use the
"Key Configuration"
area. In our example, we will configure a group call
in group 10 on key 2 of both V615 Industrial call stations. In the left area of the web interface you will
find the key number and from left to right the respective configuration options for the key.
1.
Select the
"Group Call"
function from the
"Call Function"
drop-down list for key 2.
2.
Enter group number
10
in the
"Destination"
field.
3.
Confirm your entry by pressing the
"Submit"
button.
4.
Perform steps 1-3 for both
ID 1615
and
ID 1616
.
If you now hold down button 2 of the respective V615, the device will establish a multicast connection
to group 10 and hold the connection for the duration of the button press. All devices that are
participants in group 10 are now addressed.
3.5
SIP connection
The V615 Industrial call station can be integrated as a subscriber / terminal in a SIP (Session Internet
Protocol) environment. The following RFCs are supported:
•
RFC3261 compliant (SIP 2.0) without redirection and ringing mode, for which there is
currently no application in the VIPCOS system.
•
RFC4566 compliant SDP (Session Description Protocol)
•
„Loose routing” and „strict routing”
•
„Early Media support”
•
„Offer/Answer” (RFC3264)
•
STUN Client (NAT traversal)
