Note: If the lamp pellet does not light up, you can change the socket to find out
whether the problem is on the lamp pellet or the socket. If there is a problem with
the socket, please read the online troubleshooting guide
18. )Remove the connecting wire of the round button battery box
Use a lifter to remove the blocks shown in the figure from the rear of the train, and
then pull one of the 15cm connecting wires to the rear. After making sure that the
connecting wire is placed between the studs, fix the connecting wire with black
blocks.
Summary of Contents for P134
