Von Schweikert Audio
930 Armorlite Drive, San Marcos, CA 92069
Ph (760)410-1650 Fax (760)410-1655
E-mail:
World Class Reference Speaker Systems for Music and Film
~ Website:
www.vonschweikert.com
2
MOUNTING INSIDE EQUIPMENT CABINET:
The LCR-15 was optimized for free standing or equipment cabinet mounting. Since the
open cavity in the equipment cabinet will generate some resonance, place the speakers
close to the front edge. Alternately, if the cabinet is enclosed with a door, remove the
LCR-15's grill cover and fill the cavity surrounding the speaker with acoustic foam or
fiberglass to eliminate the cavity resonance.
TIMBRE MATCHING:
Since the LCR-15 has been designed with "flat" (accurate) frequency response, it can be
used with other brands of speakers if necessary.
LCR-15 SPECIFICATIONS
SYSTEM TYPE: Shielded three-way
full range
dialogue/general purpose speaker
system. One woofer is used for bass only, while the second woofer is used for midbass
and midrange frequencies. Can be mounted horizontally or vertically.
BASS LOADING: Aperiodic Pressure Release design using 100% stuffing density.
Note that the vents are not bass reflex ports, but act as pressure release orifices. Can be
placed inside a cabinet.
BASS DRIVERS: 2pc --5.5" heavy- duty bass/mids with cast frame, cellulose acetate
pulp cones impregnated with mica substrate and damped with a carbon fiber/resin
polymer,
Low Distortion
Motor
system, butyl rubber surrounds, long throw spider, high
temperature voice coil and magnetic shielding. This new driver design has a very
natural sound quality with inaudible coloration or distortion.
TWEETER: 1" - composite silk/polymer resin dome with Ferrofluid liquid cooling,
high temperature voice coil,
Low Distortion Motor
design, and magnetic shielding. This
tweeter is very musical, without harshness, even at high volume levels that would cause
"standard" tweeters to fail.
CROSSOVER:
Global Axis Integration Network
(synthesized steep-filters with phase-
consistent behavior) with 300 Hz and 2.2 kHz crossover points. This crossover design
has been engineered to radiate sound in a wide "bubble" instead of a "beam," so that
phase and frequency response does not radically change off-axis. The finest parts have
been hand selected, including polypropylene capacitors and premium air core inductors.
BINDING POSTS: High quality "audiophile" five-way binding posts with rhodium
plating.
