24223984
1
Obtain a 1-1/4” Mortise Cylinder.
2
Position Cylinder Cam.
Make sure cylinder cam is in position shown with key removed
(Figure A). If not, remove key, remove cam, and reinstall cam in
position shown (Figure B).
Figure A
Figure B
3
Remove Center Case Cover and Cylinder Bracket.
LHR shown
LHR Top
4
Remove Dogging Hook and Bracket.
5
Install Lift Finger and Retainer Clip.
When the top slot in adjustment screw becomes visible, install retainer clip
by snapping it into the slot. Continue tightening adjustment screw to raise
the lift finger until it is snug against block.
Install lift finger thru back
side of center case, and
begin tightening the
adjustment screw.
Secure retainer clip with screw
slot
c
d
e
block
b
a
9949
9950
Special Dogging
Compatible with Models: 98/9949, 98/9949-F, 98/9949WDC, 98/9950WDC, 98/9950WDC-F
98/9949 & 98/9950
Installation Instructions
