21
20
15
L1
L2
Cellular polycarbonate shall be installed strictly defined side out (towards the
sun), which has a protective layer. The protective layer is usually at the side
with the inscriptions on the transport film. The film on the other side of sheet
is transparent. After marking the sheet, but prior to its cutting, make a mark on
the protected side of the sheet for each piece: after removal of the transport film
sheet sides are not visually different. The transport film is stripped from both
sides immediately before fixing the cladding on the frame.
Sections of polycarbonate with open
honeycombs should be covered by adhesive
tape.
16
2095
805
1480
2100
6000
330
2095
2100
L1=L2
!
17
х1
х2
х1
х2
х1
M4x10
х2
№5
х4
х4
M4x10
M4x25
х17
х17
х17
20..25мм
х1
х1
M4x25
х1
х1
