Volvo XC90 Twin Engine 2019, Owner'S Manual

Page: 508 / 700

STARTING AND DRIVING
* Option/accessory. 506
Activating and deactivating the
compass
*
The upper right-hand corner of the rearview mir-
ror has an integrated display that shows the
compass direction
26
in which the front of the car
is pointing.
Activating and deactivating the
compass
The compass is activated automatically when the
car is started.
To deactivate/activate the compass manually:
–
Depress the button on the underside of the
rearview mirror using e.g. a paper clip.
Related information
•
Compass
*
(p. 505)
• Calibrating the compass
*
(p. 506)
Calibrating the compass
*
The earth is divided into 15 magnetic zones. The
compass
27
should be calibrated if the car is
moved between several magnetic zones.
Proceed as follows to perform calibration:
1. Stop the car in a large open area free from
steel structures and high-voltage power lines.
2. Start the car and switch off all electrical
equipment (air conditioning, wipers, etc.) and
ensure that all doors are closed.
NOTE
Calibration may fail or not start at all if electri-
cal equipment is not switched off.
3. Hold the button on the underside of the rear-
view mirror depressed for approx. 3 seconds
(use a paper clip, for example). The number
for the current magnetic zone is shown.
Magnetic zones.
4. Press the button repeatedly until the
required magnetic zone ( 1–15 ) is shown.
See the map of magnetic zones for the com-
pass.
5. Wait until the display returns to showing the
character C , or hold the button on the under-
side of the rearview mirror depressed for
approx. 6 seconds until the character
C is
shown.
6. Drive slowly in a circle at a speed of no more
than 10 km/h (6 mph) until a compass direc-
tion is shown in the display, indicating that
calibration is complete. Then drive a further
2 circles to fine-tune calibration.
26
A rearview mirror with a compass is available as an option on certain markets and models only.
27 A rearview mirror with a compass is available as an option on certain markets and models only.