Volvo XC90 Twin Engine 2019, Owner'S Manual

Page: 427 / 700

HYBRID INFORMATION
425
Indicator shows selected charging current.
The symbol illuminates when the charging
cable is plugged into a 230 V socket (alter-
nating current).
Pushbuttons to increase and decrease the
charging current.
The symbol illuminates when the charging
cable is plugged into the car's charging input
socket.
NOTE
The charging cable will remember the last
setting of the charging current. It is therefore
important to adjust the setting if another
230 V socket (alternating current) is used at
the next charging.
On the charging cable's control unit, set the
required charging current 6–16 A. On delivery,
the lowest possible charging current is preset.
Related information
•
Charging current (p. 418)
•
Charging cable (p. 420)
•
Charging status in the charging cable's con-
trol unit (p. 430)
•
Start charging the hybrid battery (p. 426)
Opening and closing the hatch for
the charging input socket
The flap for the hybrid battery's charging input
socket is opened manually.
Press in the rear section of the cover and
release.
Open the cover.
Pull away the cover for the charging input
socket and secure it in the holder inside the
cover. Make sure that the cover's rubber
straps are bent downwards in order to pre-
vent the cover coming off from the holder.
IMPORTANT
Position the charging input socket's cover so
that it does not damage the paintwork (e.g. in
blustery wind).
Close the cover for the charging input socket in
reverse order.
Related information
•
Start charging the hybrid battery (p. 426)
•
Stop charging of hybrid battery (p. 438)
•
Charging the hybrid battery (p. 417)