Volvo XC90 Twin Engine 2019, Owner'S Manual

Page: 153 / 700

LIGHTING
}}
* Option/accessory. 151
Thumbwheel in instrument panel
Thumbwheel (to left) for adjusting interior brightness.
Related information
•
Adjusting light functions via the centre dis-
play (p. 151)
•
Interior lighting (p. 159)
•
Position lamps (p. 151)
•
Using direction indicators (p. 155)
•
Using main beam (p. 153)
•
Dipped beam (p. 153)
•
Rear fog lamp (p. 157)
•
Active bending lights
*
(p. 156)
•
Brake lights (p. 157)
•
Emergency brake lights (p. 158)
•
Hazard warning flashers (p. 158)
Adjusting light functions via the
centre display
Several light functions can be adjusted and acti-
vated via the centre display. This applies to
active main beam, home safe lighting and
approach light, for example.
1. Tap on Settings in the centre display's top
view.
2. Press My Car Lights and Lighting .
3. Select Exterior Lights
or
Interior Lighting
and then select the function that needs to be
adjusted.
Related information
•
Lighting control (p. 150)
•
Active main beam (p. 154)
•
Using home safe lighting (p. 159)
•
Approach light duration (p. 159)
•
Using direction indicators (p. 155)
•
Other settings in the centre display's top
view (p. 131)
•
Function view in centre display (p. 121)
Position lamps
Position lamps can be used so that other road
users can see the car if it stops or is parked. The
position lamp is switched on with the rotating
ring on the stalk switch.
Stalk switch rotating ring in position lamps position.
Turn the rotating ring to the position - the
position lamps are switched on (number plate
lighting is switched on at the same time).
If the car's electrical system is in ignition position
II then the daytime running lights are switched on
instead of the front position lamps. When the
rotating ring is in this position, the position lamps
are switched on regardless of the ignition posi-
tion of the car's electrical system.
If the car is stationary but running, the rotating
ring can be moved to the position lamp