Volvo XC90 Twin Engine 2019, Owner'S Manual

Page: 148 / 700

||
DISPLAYS AND VOICE CONTROL
146
Digits
The number commands are stated differently
depending on the function to be controlled:
•
Phone numbers and postcodes must be
spoken individually, number by number, e.g.
zero three one two two four four three
(03122443).
•
House numbers can be spoken individually
or in groups, e.g. two two or twenty-two (22).
For English and Dutch, several groups can
be said in sequence, e.g. twenty-two twenty-
two (22 22). For English, double or triple can
be used, e.g. double zero (00). Numbers can
be given within the range 0-2300.
•
Frequencies can be spoken as ninety eight
point eight (98.8), a hundred and four point
two or hundred four point two (104.2).
Speed and repetition mode
It is possible to adjust the speed if the voice is
speaking too quickly.
Repetition mode can be enabled so that the sys-
tem repeats what you have said.
To change the speed or activate/deactivate repe-
tition mode:
1. Press Settings in the top view.
2. Press System Voice Control and select
settings.
•
Repeat Voice Command
•
Speech Rate
Related information
•
Voice recognition (p. 144)
•
Controlling a telephone with voice recogni-
tion (p. 146)
•
Voice control of radio and media (p. 147)
•
Controlling climate control with voice recog-
nition (p. 203)
•
Settings for voice recognition (p. 148)
Controlling a telephone with voice
recognition
18
Call a contact, have messages read aloud or
dictate brief messages with voice control com-
mands to a Bluetooth connected telephone.
To specify a contact in the phone book, the voice
recognition command must include contact infor-
mation that is entered in the phone book. If a
contact, e.g.
Robyn Smith
, has several phone
numbers then the number category can also be
stated, e.g.
Home or Mobile : " Call Robin
Smith Mobile
".
Press and say one of the following com-
mands:
•
"
Call [contact]
" - dials the selected contact
from the phone book.
•
" Call [phone number] " - dials the phone
number.
•
" Recent calls " - displays the call list.
•
" Read message " - message is read out. If
there are several messages - select which
message should be read out.
•
" Message to [contact] " - users are
requested to say a brief message. The mes-
sage is then repeated aloud and the user
can choose to send
19
or revise the message.
For this function to work, the car must be
connected to the Internet.