Volvo XC60 Twin Engine 2020, Owner'S Manual

Page: 86 / 714

||
DISPLAYS AND VOICE CONTROL
84
Symbols in the hybrid battery gauge
The symbol in the hybrid battery gauge
indicates that the Hold function is activated,
and the symbol indicates that the Charge
function is activated.
Related information
•
Driver display (p. 79)
•
Charging the hybrid battery (p. 417)
•
Hold and Charge function (p. 484)
Trip computer
The car's trip computer records vales such as
e.g. distance, fuel consumption and average
speed whilst driving.
In order to facilitate fuel-efficient driving, infor-
mation is recorded about both instantaneous
and average fuel consumption. The informa-
tion from the trip computer can be shown in
the driver display.
Examples of trip computer information in the driver
display. The figure is schematic - parts may vary
depending on car model.
The following meters are included in the trip
computer:
•
Trip meter
•
Odometer
•
Instantaneous fuel consumption
•
Distance to empty tank
•
Distance to empty battery
•
Tourist - alternative speedometer
Units for distance, speed, etc. can be changed
via system settings in the centre display.
Trip meter
There are two trip meters, TM and TA.
TM can be reset manually and TA is reset
automatically if the car is not used for at least
four hours.
The following information is registered while
driving:
•
Mileage
•
Driving time
•
Average speed
•
Average fuel consumption
The values apply from the trip meter's latest
reset.
Odometer
The odometer records the car's total mileage.
This value cannot be reset to zero.
Instantaneous fuel consumption
This gauge shows the fuel consumption that
the car has at the moment. The value is upda-
ted approximately every second.