Volvo XC60 Twin Engine 2020, Owner'S Manual

Page: 634 / 714

||
MAINTENANCE AND SERVICE
632
1. Open the Car Status app from the app
view in the centre display.
2. Press Status to show the oil level.
Graphics for oil level in the centre display.
NOTE
The system cannot directly detect changes
when the oil is filled or drained. The car
must have been driven approx. 30 km
(approx. 20 miles) and have been station-
ary for 5 minutes with the engine switched
off and on level ground before the oil level
indication is correct.
NOTE
If the right conditions for measuring the oil
level (time after engine shutdown, the car's
inclination, outside temperature, etc.) are
not met, then the message
No value
available will be shown in the centre dis-
play. This does not mean that there is
something wrong in the car's systems.
Related information
•
Engine oil (p. 630)
•
Adverse driving conditions for engine oil
(p. 688)
•
Engine oil — specifications (p. 687)
•
Ignition positions (p. 446)
•
Car status (p. 622)
Topping up coolant
The coolant cools the internal combustion
engine to the correct operating temperature.
The heat that is transferred from the engine
to the coolant can be used to heat the pas-
senger compartment.
When topping up the coolant, follow the
instructions on the packaging. Never top up
with water only. The risk of freezing increases
with both too little and too much coolant con-
centrate.
If there is coolant under the car, if there is
coolant smoke, or if more than 2 litres (approx.
2 quarts) have been filled, always call for
recovery to avoid the risk of engine damage
due to a defective cooling system when
attempting to start the car.
WARNING
The coolant may be very hot. Never open
the cap when the coolant is hot. If a top-up
is required, unscrew the expansion tank
cap slowly to allow any overpressure to
disappear.