Volvo XC60 Twin Engine 2020, Owner'S Manual

Page: 427 / 714

HYBRID INFORMATION
}}
425
Indicator shows selected charging current.
The symbol illuminates when the charging
cable is plugged into a 230 V socket
(alternating current).
Pushbuttons to increase and decrease the
charging current.
The symbol illuminates when the charging
cable is plugged into the car's charging
input socket.
NOTE
The charging cable will remember the last
setting of the charging current. It is there-
fore important to adjust the setting if
another 230 V socket (alternating current)
is used at the next charging.
On the charging cable's control unit, set the
required charging current 6–16 A. On delivery,
the lowest possible charging current is preset.
Related information
•
Charging current (p. 418)
•
Charging cable (p. 420)
•
Charging status in the charging cable's
control unit (p. 430)
•
Start charging the hybrid battery (p. 425)
Opening and closing the hatch for
the charging input socket
The flap for the hybrid battery's charging
input socket is opened manually.
Press in the rear section of the cover and
release.
Open the cover.
Close the cover for the charging input socket
in reverse order.
Related information
•
Start charging the hybrid battery (p. 425)
•
Stop charging of hybrid battery (p. 437)
•
Charging the hybrid battery (p. 417)
Start charging the hybrid battery
The car's hybrid battery is charged with a
charging cable between the car and a 230 V
socket
6
(alternating current).
Only use the charging cable supplied with the
car or a replacement cable recommended by
Volvo.
IMPORTANT
Never connect the charging cable when
there is a risk of thunderstorm or lightning
strike.
NOTE
Volvo recommends a charging cable in
accordance with IEC 62196 and IEC
61851 which supports temperature moni-
toring.
6 The voltage in the socket may vary depending on market.