Volvo XC60 Twin Engine 2020, Owner'S Manual

Page: 150 / 714

LIGHTING
* Option/accessory. 148
Lighting control
The different lighting controls are used to
control both exterior and interior lighting. The
left-hand stalk switch activates and adjusts
the exterior lighting. The interior brightness is
adjusted using a thumbwheel on the instru-
ment panel.
Exterior lighting
Rotating ring in the left-hand stalk switch.
When the car's electrical system is in ignition
position
II , the following functions are availa-
ble for the rotating ring's different positions:
Position Specification
Daytime running lights.
Main beam flash can be used.
Daytime running lights and posi-
tion lamps.
Position lamps when the car is
parked.
A
Main beam flash can be used.
Dipped beam and position
lamps.
Main beam can be activated.
Main beam flash can be used.
Position Specification
Daytime running lights and posi-
tion lamps in daylight.
Dipped beam and position
lamps in weak daylight or dark-
ness, or when the front fog
lamp
*
and/or rear fog lamp are
activated.
The Active main beam function
can be activated.
Main beam can be activated
when dipped beam is switched
on.
Main beam flash can be used.
Active main beam on/off.
A
If the car is stationary but running, the rotating ring can be
moved to
position from another position to switch
on only the position lamps instead of other lighting.
Volvo recommends that mode is used
when the vehicle is driven.