Volvo XC 70, Owner'S Manual

Page: 113 / 396

03 Instruments and controls
03
}}
111
2. Release both buttons.
> HomeLink is now in the training (or
learning) mode and can be pro-
grammed at any time beginning with
“Programming” - step 1.
Reprogramming a Single HomeLink
Button
To program a device to HomeLink using a
HomeLink button previously trained, follow
these steps:
1. Press and hold the desired HomeLink
button.
DO NOT
release the button.
2. The indicator light will begin to flash after
20 seconds. Without releasing the Home-
Link button, proceed with “Programming”
- step 1.
For questions or comments, contact Home-
Link at: www.homelink.com/
www.youtube.com/HomeLinkGentex or by
phoning the hotline at 1–800–355–3515.
This device complies with FCC rules part 15
and Industry Canada (IC) RSS-210. Operation
is subject to the following two conditions: (1)
This device may not cause harmful interfer-
ence, and (2) This device must accept any
interference that may be received including
interference that may cause undesired opera-
tion.
NOTE
The transmitter has been tested and com-
plies with FCC and IC rules. Changes or
modifications not expressly approved by
the party responsible for compliance could
void the user’s authority to operate the
device. 20
Volvo Sensus
Volvo Sensus is the core of the contact inter-
face with your vehicle. Sensus provides infor-
mation, entertainment and offers access to
functions that make owning and operating a
Volvo easier.
Volvo Sensus is the operating system in your
vehicle and it enables you to interact intui-
tively with the vehicle’s various features and
functions, including accessing the Internet,
when it suits you.
Volvo Sensus uses the center console screen
to display information and menus, and to
offer a user interface that enables you to
make personalized settings for e.g., vehicle,
infotainment and climate system functions.
The buttons on the center console or the
steering wheel keypad are used to activate/
deactivate functions and change numerous
settings.
20 The term “IC:” before the certification/registration number only signifies that Industry Canada technical specifications were met.