manualshive.com logo in svg

Volvo V70XC Cross country 1998, Owner'S Manual

The 1998 Volvo V70XC Cross Country is a versatile and rugged vehicle built to conquer any terrain. Enhance your ownership experience by downloading the free Owner's Manual from manualshive.com, a comprehensive and informative guide that provides in-depth instructions and insights for your Volvo V70XC.

Share
Download
background image

1998 Volvo SV70

Page 4 of 7

.../PageContent.asp?PageID=1079&U={A308DBD7-11E2-6E5B-32ED-82405EEBA5B1}&V={CAB0F6D6-415D-C205-E1E4-41F3DD1CF3F0}&T=3&C=230,229,233,239,225,799,825,409,10 12/30/02

 

Dolby Prologic Surround Sound 

Together with a center speaker mounted at the center of the dash, Dolby Prologic Surround Sound offers much clearer and more realistic sound. 
Through a connection to a special decoder (optional on certain models), as well as a center speaker (option), the normal left-right stereo channels are divided into left-center-right. In addition, "surround" sound can be 
created from the car's rear speakers. 
Most modern discs are recorded so that vocals are heard in the center foreground, while the orchestra is heard across the entire left-right range, as well as from behind. 

A- Engaging Surround Sound 

Press the 'MODE' button to engage the center speaker and the surround unit. The mode selected will be displayed. 
"3 CH" = center speaker also engaged. 
"Dolby Prologic" = Dolby Prologic engaged with surround effect from rear speakers*. 

B - Center speaker volume control 

First pull the button out and then turn it to adjust the volume of the center speaker. 

C - Surround effect volume control 

pg. 191 Dolby Prologic Surround Sound (certain models) 

Summary of Contents for V70XC Cross country 1998







































































































































































































































































Reviews:

No comments

Related manuals for V70XC Cross country 1998

VEAP SHIELD UNITED FT Series Mounting Instruction preview
FT Series
Brand: VEAP SHIELD UNITED Pages: 3
Subaru SPLASH GUARD Installation Manual preview
SPLASH GUARD
Brand: Subaru Pages: 3
Kia CADENZA 2019 Features & Functions Manual preview
CADENZA 2019
Brand: Kia Pages: 54
Metra Electronics 99-9001 Installation Instructions preview
99-9001
Brand: Metra Electronics Pages: 2
Thule 1306 RAPID SYSTEM Fitting Instructions Manual preview
1306 RAPID SYSTEM
Brand: Thule Pages: 8
Ironton 44596 Owner'S Manual preview
44596
Brand: Ironton Pages: 7
Doug Thorley Headers THY-464-1 Instructions preview
THY-464-1
Brand: Doug Thorley Headers Pages: 5
Edelbrock 66002 Installation Instructions preview
66002
Brand: Edelbrock Pages: 2
Pontiac 2004 Vibe Navigation System Owner'S Manual preview
2004 Vibe Navigation System
Brand: Pontiac Pages: 44
KEKO K162 Installation Instructions Manual preview
K162
Brand: KEKO Pages: 13
Road Armor Stealth 4191F Series Install Instructions preview
Stealth 4191F Series
Brand: Road Armor Pages: 5
NavInc CP-PEU-GV3 Manual preview
CP-PEU-GV3
Brand: NavInc Pages: 6
E&G Classics Denali 1094-0185-15 Instruction Manual preview
Denali 1094-0185-15
Brand: E&G Classics Pages: 3
Metra Electronics 99-7803G Wiring Instructions preview
99-7803G
Brand: Metra Electronics Pages: 2
Ford FUSION 2014 Owner'S Manual preview
FUSION 2014
Brand: Ford Pages: 458
MAcarbon MAA.R8.06 Install Instructions preview
MAA.R8.06
Brand: MAcarbon Pages: 3
Prorack K947 Fitting Instructions Manual preview
K947
Brand: Prorack Pages: 14
Painless Performance VORTEC 60211 Installation Instructions Manual preview
VORTEC 60211
Brand: Painless Performance Pages: 16

Brands by name

Popular brands

Load more brands