Volvo V60, Owner'S Manual

Page: 88 / 176

||
PRACTICAL INFORMATION
86
Information on the sidewall
Federal law mandates that tire manufacturers
place standardized information on the sidewall of
all tires (see the illustration).
The following information is listed on the tire
sidewall:
The tire designation:
NOTE
Please be aware that the following tire desig-
nation is an
example only
and that this par-
ticular tire may not be available on your vehi-
cle.
1.
215
: the width of the tire (in millimeters)
from sidewall edge to sidewall edge. The
larger the number, the wider the tire.
2.
65
: The ratio of the tire's height to its width
in percent.
3.
R
: Radial tire (the designation
RF
and the
symbol indicate that the vehicle is
equipped with optional self-supporting run
flat tires
12
.
4.
15
: The diameter of the wheel rim (in
inches).
5.
95
: The tire's load index. In this example, a
load index of 95 equals a maximum load of
1521 lbs (690 kg).
6.
H
: The tire's speed rating, or the maximum
speed at which the tire is designed to be
driven for extended periods of time, carrying
a permissible load for the vehicle, and with
correct inflation pressure. For example, H
indicates a speed rating of 130 mph
(210 km/h).
NOTE
The tire's load index and speed rating may
not appear on the sidewall because they are
not required by law.
7.
M+S or M/S
= Mud and Snow,
AT
= All Ter-
rain,
AS
= All Season
8.
U.S. DOT Tire Identification Number
(TIN)
: This begins with the letters "DOT" and
indicates that the tire meets all federal
standards. The next two numbers or letters
are the plant code where it was manufac-
tured, the next two are the tire size code and
the last four numbers represent the week
and year the tire was built. For example,
1510 means that the tire was manufactured
during week 15 of 2010. The numbers in
between are marketing codes used at the
manufacturer's discretion. This information
helps a tire manufacturer identify a tire for
safety recall purposes.
9.
Tire Ply Composition and Material Used
:
Indicates the number of plies indicates or the
number of layers of rubber-coated fabric in
the tire tread and sidewall. Tire manufactur-
ers also must indicate the ply materials in the
tire and the sidewall, which include steel,
nylon, polyester, and others.
10.
Maximum Load
: Indicates the maximum
load in pounds and kilograms that can be
carried by the tire. Refer to the vehicle's tire
information placard located on the B-Pillar
for the correct tire pressure for your vehicle.
11.
Treadwear, Traction, and Temperature
grades
: see Tire specifications – Uniform
12 Self-supporting run flat tires may not be available on all models