POWER FRONT SEATS
*
Use the controls on the outboard side of a front seat to adjust the
seat's position, lumbar support
*
, etc. One of the controls is shaped like
a seat and is used to make basic seat adjustments. The other control is
used to adjust lumbar support, use the massage function
*
, etc.
The seat-shaped control
Adjust the height of the seat cushion or move the entire seat using the
lower section of the control. Adjust backrest tilt with the rear section of
the control.
The multifunction control
*
Settings for the massage function
*
, side bolsters
*
, lumbar support
*
, and
extending the seat cushion
*
are made using the multifunction control.
1. Turn the multifunction control to open the seat settings window in
the center display.
2. Select the desired function in the center display by turning the con-
trol.
3. Change the desired settings by pressing the upper/lower/front/rear
sections of the control. Some of the settings can also be made by
tapping the respective buttons in the center display.
Storing seat settings
1. Adjust the seat, door mirrors and head-up display
*
to the desired
positions and press the
M
button on the door. The indicator light in
the button will illuminate.
2. Press button
1
or
2
within
three seconds
to store the new settings
in the selected button. An audible signal will sound and the indicator
light in the
M
button will go out.
Press one of the buttons to move the seat to the settings that have
been stored in that button.