15
Menus
There are several sub-menus under each main menu.
There is not always space for all the menu choices on
the display. To scroll through the menus, use the “7”
and “9” buttons on the display. Press the “SEL” button
“8” to make a selection. See illustration on the previ-
ous page.
NOTE!
The “Setup” menu can be used to select the
language that you want to use on the display.
Main menu
n
Engine data
, current engine data
n
Preheat
, manual activation of preheating
OBS!
Must be activated when the temperature is
below 0°.
n
Governor mode
, activates droop
n
Diagnostics
, shows fault codes in text
n
Trip reset
, restores trip data
n
Setup
, parameter setting
n
Information
, shows the data for the applicable
hardware, software, data set and engine identifica-
tion of the engine and DCU
Engine data
shows relevant engine data.
•
Engine rpm, can be controlled with the “SPEED +”
and “SPEED -” buttons (rpm)
•
Charge pressure (kPa)
•
Coolant temperature (°C)
•
Charge air temperature (°C)
•
Oil pressure (kPa)
•
Oil temperature (value
not
shown – sender missing)
•
Engine hours (h)
•
Battery voltage (V)
•
Fuel consumption (l/h)
•
Momentary fuel consumption (trip fuel) (l)
Summary of Contents for TAD734GE
