B8900866
handle (C). Press the U-bracket (D) upwards until it is tight
against the load carrier.
5
B8900867
Fold down the lock handle (C) to the horizontal position. This
requires a force of approximately 50 N, there should be
considerable tension. If this is not the case the U-bracket
installation must be repeated
Then fold the safety bracket (E) over the lock handle (C) until it
snaps shut. If this cannot be done, check that the lock handle is
snapped shut in the final position. Install the other three securing
plates in the same way.
Note!
Check that the box is securely fixed to the load carrier at regular
intervals.
Installing the ski holder
6
Installing the ski holder
Install the ski holders (f) by first pressing the first and then the
second bolt (G) onto the underneath of the ski holder and in fork
(H) on the securing plate (A)
Thread the tensioning strap (I) through the eyelets on the
securing plates (A). When transporting skis, the skis must be
placed on the ski holder (F) and tightened securely using the
tensioning strap (I).
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Ski box- 9172151 - V1.0
Page 5 / 7
