Volvo SENSUS NAVIGATION WEB EDITION, Manual

Page: 17 / 66

VOICE RECOGNITION
}}
15
Example of voice recognition control
Press , say “
Call [Forename] [Surname]
[number category] " - calls the selected contact
from the phone book if the contact has more
than one phone number (e.g. home, mobile,
work), e.g.:
Press , say " Call Robin Smith Mobile ".
Commands/phrases
The following commands are always available for
use:
•
" Repeat " - repeats the last voice instruction
in the ongoing dialogue.
•
" Cancel " - discontinue the dialogue
•
" Help " - starts a help dialogue. The system
replies with the commands available in the
current situation, a prompt or an example.
Commands for specific functions are described in
the corresponding sections, e.g. Voice recogni-
tion control of the phone.
Digits
The number commands are stated differently
depending on the function to be controlled:
•
Phone numbers and postcodes must be
spoken individually, number by number, e.g.
zero three one two two four four three
(03122443).
•
House numbers
can be spoken individually
or in groups, e.g. two two or twenty-two (22).
For English and Dutch, several groups can
be said in sequence, e.g. twenty-two twenty-
two (22 22). For English, double or triple can
be used, e.g. double zero (00). Numbers can
be given within the range 0-2300.
•
Frequencies can be spoken as ninety eight
point eight (98.8), a hundred and four point
two or hundred four point two (104.2).
Related information
•
Voice recognition (p. 14)
•
Settings for voice recognition (p. 16)
Voice recognition and map
navigation
With voice recognition control, many functions in
the navigation system can be activated by spo-
ken words.
Voice recognition is comprehensively described
in the sections "Voice recognition", "Using voice
recognition" and "Settings for voice recognition".
Voice commands
The following are some examples of voice com-
mands that are unique to map navigation.
Press the steering wheel button and say
one of the following commands:
•
“ Navigation ” - Initiates a navigation dialogue
and shows examples of commands.
•
" Take me home " - Guidance is given to the
Home position.
•
" Go to [City] " - Specifies a town as the
destination. E.g. "Drive to Coventry".
•
" Go to [Address] " - Specifies an address
as a destination. An address should contain
city and street. E.g. "Drive to 5 King Street,
Coventry".
•
" Set [intersection] " - Specifies an intersec-
tion as a destination. Search for intersection
takes place within the search area specified.