Volvo S90 2018, Quick Manual

Page: 14 / 42

POWER * FRONT SEATS
Use the controls on the outside of the seats to adjust the seat position,
lumbar support
*
, etc. One control is shaped like a seat so you can more
easily understand how you change position; the other one, the multi-
function control
* , is used for adjusting lumbar support, massage * , etc.
The seat-shaped control
Use the lower section of the control to adjust the height of the seat
cushion or move the entire seat. Use the rear section of the control to
adjust backrest tilt.
The multifunction control *
Settings for massage * , side bolsters * , lumbar support * and seat cushion
extension are adjusted using the multifunction control.
1. Turn the multifunction control to open the seat settings window in
the center display.
2. Select the desired function in the center display by turning the con-
trol.
3. Adjust the setting by pressing the upper/lower/front/rear sections of
the control.
Storing settings
1. Adjust the seat, door mirrors and head-up display *
to the desired
positions and press the
M
button on the door panel. The indicator
light in the button will illuminate.
2. Press and hold down memory button
1
or
2
within three seconds. An
audible signal will sound and the indicator light in the
M
button will
go out.
To use your stored seat settings:
With door open - press one of the memory buttons and release.
With door closed - press and hold one of the memory buttons until the
seat reaches the stored position.
02