Volvo S60 Twin Engine 2020, Owner'S Manual

Page: 421 / 687

STARTING AND DRIVING
}}
* Option/accessory. 419
Reverse - R
Select
R
when backing up. The vehicle must
be stationary when Reverse is selected.
Neutral - N
No gear is selected and the engine can be
started. Apply the parking brake if the vehicle
is stationary with the gear selector in
N .
To move the gear selector from N to another
gear, the brake pedal must be depressed and
the ignition in mode
II .
D drive mode
D is the normal driving gear position. The
transmission shifts up or down automatically
depending on acceleration and speed.
The vehicle must be stationary when the gear
selector is moved from
R to D .
Brake - B
Brake position in instrument panel overview.
From the B position, it is possible to shift
manually. B can be selected at any time while
driving. When the accelerator pedal is
released, the electric motor brakes the vehicle
and the hybrid battery is recharged at the
same time. This offers additional opportunities
to recharge the hybrid battery, since the bat-
tery is charged even when the brake pedal is
not depressed.
Select brake by moving the gear selector rear-
ward from the
D position. The currently
selected gear will be displayed in the instru-
ment panel.
•
Push the gear selector to the right toward
"
+ " (plus) and release to shift up one gear.
•
Push the gear selector to the left toward
"
– " (minus) and release to shift down one
gear.
•
Push the gear selector rearward to return
to
D mode.
For smooth shifting and engine performance,
the transmission will shift down automatically
if the vehicle's speed becomes too low for the
selected gear.
Related information
•
Automatic transmission (p. 417)
•
Shiftlock (p. 420)
•
Using the steering wheel paddles
*
to shift
(p. 419)
•
The kickdown function (p. 421)
Using the steering wheel paddles
*
to shift
The steering wheel paddles are a supplement
to the gear selector and make it possible to
shift manually without removing your hands
from the steering wheel.
" - ": Shift down one gear.
" + ": Shift up one gear.
Activating the steering wheel paddles
In order to shift gears using the paddles, they
must first be activated:
–
Pull one of the paddles toward the steer-
ing wheel.
> A number in the instrument panel indi-
cates the current gear being used.