Volvo S60 Cross Country 2016, Owner'S Manual

Page: 197 / 440

07 Driver support
07
}}
*
Option/accessory, for more information, see Introduction.
195
Cruise control* - managing speed
It is possible to activate, set and change the
stored speed.
Activating and setting the speed
To start the cruise control:
•
Press the steering wheel button for
CRUISE ( without speed limiter) or
(
with
speed limiter).
> The cruise control symbol (6) in the com-
bined instrument panel illuminates -
cruise control is in standby mode.
To activate cruise control:
•
At the required speed - press the steering
wheel button
or .
> The current speed is stored in memory
and the combined instrument panel's
marking (5) illuminates at the selected
speed and the symbol (6) changes from
GREY to WHITE - the car then follows the
stored speed.
NOTE
Cruise Control cannot be enabled at
speeds below 30 km/h.
Changing the stored speed
Stored speed is changed with short or long
presses on the
or steering wheel but-
ton.
To /- 5 km/h:
•
Use short presses - each press gives
+/- 5 km/h.
To /- 1 km/h:
•
Hold down the button and release it at
the required speed.
Last press made is stored in the memory.
If speed is increased using the accelerator
pedal prior to pressing the
/ button,
then it is the car's current speed when the
button is pressed that is stored.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the cruise control setting - the car
returns to the last stored speed when the
accelerator pedal is released.
NOTE
If any of the Cruise Control buttons are
held depressed for several minutes then it
is blocked and deactivated. To be able to
reactivate Cruise Control, the car must be
stopped and the engine restarted.
Related information
•
Cruise control* (p. 194)
Cruise control* temporary
deactivation and standby mode
The function can be temporarily deactivated
and set in standby mode.
Temporary deactivation - standby mode
To temporarily disengage cruise control and
set it in standby mode:
•
Press the steering wheel button .
> The combined instrument panel's
marking (5) and symbol (6) change colour
from WHITE to GREY - cruise control is
temporarily disengaged.