Volvo S 90, Owner'S Manual

Page: 266 / 548

||
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction. 264
Related information
•
Starting and activating Adaptive Cruise
Control (ACC)
*
(p. 264)
•
Changing Adaptive Cruise Control (ACC)
speed (p. 267)
•
Setting an Adaptive Cruise Control time
interval (p. 267)
•
Changing target vehicles and automatic
braking with Adaptive Cruise Control (ACC)
(p. 269)
•
Switching between Cruise Control and
Adaptive Cruise Control
*
(p. 258)
•
Passing Assistance with Adaptive Cruise
Control or Pilot Assist-2 (p. 268)
•
Deactivating/resuming Adaptive Cruise
Control (ACC) (p. 265)
•
Adaptive Cruise Control (ACC) - trouble-
shooting (p. 271)
•
Adaptive Cruise Control (ACC) symbols and
messages (p. 273)
•
Pilot Assist
*
(p. 275)
•
Distance Alert
*
(p. 259)
•
Head-up display (HUD)
*
(p. 116)
•
Radar sensor limitations (p. 299)
Starting and activating Adaptive
Cruise Control (ACC)
*
ACC must first be put in active mode before it
can be started in order to regulate speed or a
set time interval to the vehicle ahead.
Starting ACC (putting it in standby
mode)
Function buttons and symbols
–
Press
◀
(2) or
▶
(3) to scroll to the ACC
( ) function. The symbol (4) will be dis-
played in the instrument panel.
> The symbol indicates that ACC has been
started
and is in standby mode
. In
standby mode, the vehicle will
not
main-
tain a set speed or a time interval to the
vehicle ahead.
Activating ACC (putting it in active
mode and setting a speed)
Before ACC can be put in active mode:
•
The driver's seat belt must be buckled and
the driver's door must be closed.
•
There must be a vehicle ahead (a target vehi-
cle) within a reasonable distance or your
vehicle's current speed must be at least
9 mph (15 km/h).
–
With the symbol displayed (ACC is in
standby mode), press the button (1) on
the left-side steering wheel keypad.
> This puts ACC in active mode and sets
the vehicle's current speed, which is indi-
cated by digits in the center of the speed-
ometer.