Volvo S 90, Owner'S Manual

Page: 164 / 548

||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction. 162
Power seat controls
Move the passenger's seat forward/rearward
by moving the control forward/rearward.
Change the passenger seat's backrest tilt by
moving the control forward/rearward.
Related information
•
Power front seats
*
(p. 160)
•
Adjusting power front seats
*
(p. 161)
•
Seat belts (p. 61)
Using the power seat memory
function
*
The memory function can be used to store the
settings (positions) of the power front seats
*
,
door mirrors and the head-up display
*
.
Two different settings can be stored using this
function. Memory controls are found on one or
both of the front doors
*
.
M
(memory) button
Button for storing a position
Button for storing a position
Storing a position
1. Adjust the seat, door mirrors and head-up
display to the desired positions.
2. Press and release the
M
button. The indica-
tor light in the button will illuminate.
3. Press button
1
or
2 within 3 seconds
to
store the current position of the seat/
mirrors/head-up display in the selected but-
ton.
> When the position has been stored in the
selected button, an audible signal will
sound and the indicator light in the
M
but-
ton will go out.
If none of the buttons (1 or 2) are pressed within
3 seconds, the indicator light in the
M
button will
go out and the position will
not
be stored.
The seat/mirrors/head-up display must be
moved before new settings can be stored.
Using a stored position
A stored position can be used when one of the
front doors is opened or closed:
Front door open
–
Press one of the bottons (
1
or
2
) briefly. The
seat, door mirrors and head-up display will
move to the positions stored in that button.