||
10 Maintenance and service
10
350
Filling
The fluid reservoir is located on the driver's side.
The fluid reservoir is protected under the
cover over the cold zone in the engine com-
partment. The round cover must be removed
first before the reservoir cap can be reached.
Turn and open the cover located on the
covering.
Unscrew the reservoir cap and fill the
fluid. The level must be between the
MIN
and
MAX
marks, which are located on
the inside of the reservoir.
IMPORTANT
Do not forget to refit the cap.
Power steering fluid - level
The power steering fluid level must be
between the reservoir's
MIN
and
MAX
marks.
The fluid does not need to be changed.
IMPORTANT
Keep the area around the power steering
fluid reservoir clean when checking. The
cover must not be opened.
Check the level frequently. The fluid does not
require changing. The level must be between
the
MIN
and
MAX
marks.
For recommended fluid grade, see Power
steering fluid - grade (p. 399).
NOTE
If a fault should arise in the power steering
system, or if the engine is switched off and
must be towed, then the car can still be
steered.
Summary of Contents for S 80
