27
M3702809
Cable routing
Route the wiring (A in the kit illustration) for the display screen
and the radio, and the loose cable for the display screen with the
ten pin connectors (B in the kit illustration) to the radio socket
between the air duct (1) and the stay (2). Ensure that the straight
connector on the loose cable (B) is routed to the cut out for the
radio
Route the green 5-pin power supply connector (3) for the display
screen and the cable (B) to the left of the air ducts above the
hole for the radio. Continue up through the cut out for the
dashboard loudspeaker
Secure the wiring in the stay (2). Use a tie strap (4)
Route the wiring above and along the air duct (1) to the member
(5)
Clamp the wiring at the existing cable harness (6). Use a tie
strap.
28
M3702379
Route the wiring (1) under the carpet along the left side of the
car to the rear door
Install the protective caps on the lugs (2) for the cable ducts
Route the wiring further above and along the front cable duct (3).
Continue along the right hand side of the rear cable duct (4)
Connect the ground lead to the rear ground terminal (4) on the
left side of the rear seat. Tighten the screw. Tighten to 10 Nm
(7.4 lbf.ft).
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
RTI S60- 8685716 - V1.0
Page 20 / 34
